TS-590S portal

I have come across with a nice page for TS-590S. At the moment, I am interested in the articles that explain how to monitor the rig's  CAT commands in particular.
http://homepage.ntlworld.com/wadei/ts-590s.htm

UZ7HO AX.25 sound card modem

I tried to experience the UZ7HO AX.25 sound card  modem. The program can be downloaded from:
http://uz7.ho.ua/index.php?lang=eng&id=4
I installed it on my Windows 7. After launching the program, I set the modem baud rate to 1200bps, and monitored the APRS frequency on 144.390Mhz. With the internal mic, the signal shows on the waterfall but is not decoded. I tried to raise the mic gain from the menu but it does not seem to work - i.e. nothing happens after I select the menu item for setting the input gain. I will read the manual again thoroughly to see if there is something I may be missing.

There is a UNUN schematic provided by K0BG.

An F114-67 ferrite core is used with a few feet of #14 enameled copper wire (enough for 9 bifilar turns).

160m small receiving loop antenna

I found this small loop antenna diagram from an old magazine. It looks to be a reproduction of the 1938 QST drawings of the W6GPY receiving loop antenna for 160 meters. If the 4-turn is reduced to 3-turn, then it will cover 80 meters. One separate turn is used for coupling.

Then the following is another version of the W1FB loop as discussed in July, 1977, QST magazine.
Alright, the picture is upside-down.

50Mhz band plan

I copied the 6m band plan for my future reference. As a non-frequent 6m Ham radio operator, I do not bother to memorize this complicated band plan.

LF local oscillator idea

I found this schematic. What I am interested in is the circuit portion of using the schmitt trigger nand gate IC - CD4093. This can generate a frequency somewhere between 70Khz to 1Mhz or it is what I read. I bought the IC while I was visiting a store in case I need a low frequency local oscillator.

Intersting links for Android audio interface

I found a couple of interesting web links this morning. I have been thinking about developing Ham radio applications on Android. The major part that I have not figured out yet is how to sample audio data from Andriod audio input. It would need more digging for available APIs.

This gentleman (or company) must already figure that out and developed a hardware interface to be used with his applications including DroidPSK. The link is:
http://www.wolphi.com/android-apps/droidpsk/droidpsk-to-ft817-interface

He references another interface link upon which his design is based:
https://sites.google.com/site/kh6tyinterface/

The above shows how to enable PTT using the audio input from a receiver.